Currently reading: Under the skin: How old ideas are helping to spark new advancements for hydrogen
Hydrogen technology is continuing to make progress
News
3 mins read
22 November 2021

The development of hydrogen engines that to all intents and purposes are free of both toxic and CO2 emissions at the tailpipe continues to make progress. The latest news is that Mahle, alongside Swiss firm Liebherr Machines Bulle, has devised a new method of injecting and combusting hydrogen into a piston engine that dodges the usual problem of unstable combustion causing pre-ignition and detonation. 

Hydrogen contains no carbon and no hydrocarbons, so the only unwanted emissions it can produce is NOx, which occurs when nitrogen in the air is oxidised at high temperatures. For hydrogen to produce enough power, the engine must run at a very high compression ratio, but to avoid those high combustion temperatures, the hydrogen must also be diluted with large amounts of air. The combination of an air-rich mixture of hydrogen and air is what can cause that troublesome unstable ignition. One way of avoiding it is to reduce the compression ratio, but then, in one of those rock-and-a-hard-place situations, the engine becomes inefficient, producing less power for the amount of fuel burned. 

That’s where Mahle has come in with its Mahle Jet Ignition (MJI) system, which was originally developed as an idea for boosting the efficiency of a petrol hybrid powertrain. MJI is a spark-ignition pre-chamber combustion technology comprising a small chamber within the main combustion chamber into which the tip of a fuel injector and the tip of the spark plug protrude. A small quantity of hydrogen is injected into the pre-chamber and ignited by the spark, just as the full charge in the main combustion chamber is fully compressed and ready to be ignited. 

The main charge is extremely diluted (lean), remember, and were it directly ignited by a conventional electrical spark as usual, unstable ignition could be the result. Instead, the mixture of hydrogen and air in the pre-chamber combusts and fires high-temperature gas plasma through small nozzles into the main combustion chamber. The intensity and spread of the hot gas ensure the main charge burns completely, uniformly and efficiently without the need to reduce the compression ratio. 

In the world of automotive, what goes around eventually comes around. The original liquid-fuel version of MJI isn’t unlike that of Honda’s Compound Vortex Controlled Combustion used by the engine of the original Civic in the 1970s. Now here’s a similar technology being adapted more than 40 years later for the successful combustion of hydrogen in place of petrol. 

Liebherr Machines Bulle has been developing the hydrogen version of MJI technology for use in its H966 and H964 engines for heavy-duty construction equipment, but it will be interesting to see if Mahle is able to tempt car makers with the technology as well. Toyota has already been experimenting with hydrogen versions of the GR Yaris engine and both Bosch and Ricardo are also researching its use.

Back to top

Cars to return to nature

The Retrac Group, a British composites specialist, has launched a range of recycled and natural carbonfibre materials. Demonstration products include a supercar bonnet made of Evopreg Amplitex. This is a combination of pre-pregnated materials expert Composite Evolution’s Evopreg and Bcomp’s flax-based natural composite Amplitex used in conjunction with Bcomp’s Powerribs reinforcement system. 

Join the debate

Comments
3
Add a comment…
pikkoz 22 November 2021

I'm skeptical about  using an internal combustion engine with 100% hydrogen for private cars  .

The solution found may help in reducing the NOx gases but it still won't help a lot with the low specific power per volume in the chamber (hp/litre)  , the bmw hydrogen 7 had a specific power of 38hp/litre , even if this technology will increase it by a lot like what you can do with superchargers  (let's say 150% ) you'll need a 2.6l engine to develop 150hp .

But it isn't just that , even if a fuel cell EV can use the hydrogen to motion with an efficiency of 60%  the 2021 mirai to achieve 402 miles requires big tanks that eats a lot of space (and weight quite a lot) to the point that for a 5 meter long sedan it's cramped inside with a minuscule boot . Now let's swap the fuel cell with an internal combustion engine that has roughly half the efficiency of the Fuel cell and you roughly have the same car with a 200 or so mile range .    

You then have a car that is 5 meter long  2T shy of weight, underpowered, still noisy , that still emits NOx gases and some particulate (you know oils), that requires high quality  lubrificant oils that potentially degrade faster (higher combustion T + idrogenation of oil esters ) , still require gears , that has a lower range than most modern EV  and requires like something like at least 5 times the electricity to produce a fill up of hydrogen compared to an EV (6.5kg of hydrogen needs around 360kWh to be produced + transport) .

streaky 22 November 2021

The bit about Honda's CVCC Civic engine from the 70's is interesting.  Has Honda since continued with this technology in all its engines (they have always been some of the most efficient) or has it been ditched?  If so, why?

russ13b 22 November 2021

Don't the current F1 engines use this? What happened to Mazda's hydrogen rotary from about 15 years ago?